Business Items 营业项目

05-01.:SUPPORT TUBE SET(PVC头)..

品名(Description):SUPPORT TUBE SET(PVC头)
材质(Material):PVC tube/ PVC washer/ M6~8 SUS screw
尺寸(Size):Ø15~Ø9.95*L(20.5+38)mm
原厂型号(OEM PN):DNS-Screen#N
产品型号(WSTech. PN):WST-AE.01S08.006
备注(Note):use with 05-02.:SIDE GUIDE ROLLER for Stripper/AL for G4~G8

05-02.:SIDE GUIDE ROLLER for AL/Stripper..7J438712(7-J4-38712)

品名(Description):SIDE GUIDE ROLLER for AL/Water/Stripper
材质(Material):UPE
尺寸(Size):Ø25.05*Ø8.08 or Ø10.1*20.5mm(AL section use、Ø35.1*Ø10.08*20.05mm(Water section use)、Ø25*Ø8*18mm(Water section-AA Jet use)、Ø45*Ø8.2*L20.1mm、Ø45*Ø8.2*L17mm、Ø35.1*Ø12.05*L20.05mm...etc.
原厂型号(OEM PN):DNS-Screen#7-J4-38712(7J438712)
产品型号(WST PN):
* WST-AE.01R06.020..、
* WST-AE.02R06.041..STR.、CIR. Side Guide Roller for Water/Stripper.Ø35.1*Ø 10.08*L20.05mm.DNS#7-J4-38712
* WST-AE.01R06.073 or L5AE2#AE.01G07.006..Side Guide Roller.侧边滚轴 for AL.Ø25.05*Ø10.05*L20.05mm.WST-A7A3681.DNS#7J438712
* WST-AE.02R06.143..Guide Roller for 水段 AA Jet.Ø25*Ø8*L18mm
备注(Note):
1. For G4~G7 use,主要是让基版(Glass)靠著行进防止基板偏移(Shift),确认有刻痕时即需更换以防止基板缺角与破片之风险发生。
* O.D.Ø25mm for AL section use, 101 pcs in Stock..2011/11/08.
* O.D.Ø35mm for Water(L7A)/Stripper(L7B) section use,  16 pcs in Stock..2011/11/08.
2. For DMS-G4.5 use:
#WST-HC0000-040W0052-0/Middle Roiller, Ø150-Ø17mm, UHMW(conductivity)、#WST-HC0000-900W0076-0/Middle Roller, Ø60-Ø17, UHMW(conductivity)、#WST-HC0730-040W0035-0/Middle Roller, UHMW、#WST-HC0000-040W4001-2, PVDF、Roller-150[In], 60[Out] ..fro Pre ITO、Roller-60[In & Dry], 150[Out] ..from Post ITO、Material:Conductiing UHMW-PE ...etc.

05-03.:WASHER IN MOTOR 轴套..7J407137

品名(Description):WASHER IN MOTOR 轴套
材质(Material):UPE
尺寸(Size):Ø40*T3mm
原厂型号(OEM PN):DNS-Screen#7J407137
产品型号(WST PN):WST-AE.01W01.001
备注(Note):G4 Wet-Etching use.

05-04.:AXIS RECEIVER SIN MOTOR 轴套..7J407136

品名(Description):AXIS RECEIVER SIN MOTOR 轴套
材质(Material):UPE
尺寸(Size):Ø31*L25*T3mm
原厂型号(OEM PN):DNS-Screen#7J407136
产品型号(WST PN):WST-AE.02R01.111
备注(Note):G4 Wet-Etching use.

05-05.:ROLLER HOLDER SET FOR DRY UNIT..7J415411/2

品名(Description):ROLLER HOLDER SET FOR DRY UNIT
材质(Material):PVC
尺寸(Size):W46*L50*T16.1 & T23.1mm
原厂型号(OEM PN):DNS-Screen#7J415411 & 2
产品型号(WST PN):WST-AE.01H03.009 & WST-AE.01H03.010
备注(Note):G4 Wet-Etching use.

05-06.:ROLLER HOLDER 滚轮轴座..

品名(Description):ROLLER HOLDER 滚轮轴座
材质(Material):PVC/透明
尺寸(Size):W50*L100*T16mm、W50*L100*T16mm
原厂型号(OEM PN):
产品型号(WST PN):WST-AE.01H03.005 & WST-AE.01H03.006
备注(Note):G4 Wet-Etching use.

05-07.:BEARING HOLDER..7J33724708

品名(Description):BEARING HOLDER
材质(Material):UPE
尺寸(Size):W70*H59*T20mm
原厂型号(OEM PN):DNS-Screen#7J33724708
产品型号(WST PN):WST-AE.
备注(Note):G6 Wet-Etching use.

05-08.:EXIT GUIDE ROLLER 滚轮..

品名(Description):EXIT GUIDE ROLLER 滚轮
材质(Material):UPE
尺寸(Size):Ø25*Ø8/Ø10*T10mm
原厂型号(OEM PN):
产品型号(WST PN):WST-AE.01R06.042
备注(Note):G4~G5 Wet-Etching use. "GUIDE ROLLER"主要是让基版(Glass)靠著行进防止基板偏移(Shift),确认有刻痕时即需更换以防止基板缺角与破片之风险发生.

05-09.:ROLLER BUSH 轴套..7J428578

品名(Description):ROLLER BUSH 轴套
材质(Material):UPE
尺寸(Size):Ø29*L28*T2mm
原厂型号(OEM PN):DNS-Screen#7J428578
产品型号(WST PN):WST-AE.01B20.003
备注(Note):with Stocks

05-12.:BEARING-D25..7J409232

品名(Description):BEARING-D25
材质(Material):UPE
尺寸(Size):Ø40~Ø25*L20mm
原厂型号(OEM PN):DNS-Screen#7J409232
产品型号(WST PN):WST-AE.
备注(Note):use for G5~G7 Wet-Etching with stocks.

05-13.:W/E ROLLER BEARING..

品名(Description):W/E ROLLER BEARING
材质(Material):UPE/ PCTFE
尺寸(Size):UPE=Ø20~Ø12*L9.5mm/ Ø20~Ø12*L13.5mm; PCTFE=Ø20~Ø10.15*L13mm/ Ø27~Ø15*L14.9mm/ Ø27~Ø15*L14.9mm/ Ø27~Ø 15*L14.9mm/ Ø27~Ø15*L14.9mm
原厂型号(OEM PN):DNS-Screen#
产品型号(WSTech. PN):UPE=WST-AE.02R01.106/ WST-AE.01B04.007; PCTFE=WST-AE.02R01.102/ WST-AE.02R01.103/ WST-AE.02R01.104/ WST-AE.02R01.105/ WST-AE.02B04.107
备注(Note):G3E2

05-21.:PPS/PVC联轴器+UPE/PVDF内环..07070167-203501~2

品名(Description):PPS/PVC联轴器+UPE/PVDF内环
材质(Material):PPS or PVC/ UPE or PVDF
尺寸(Size):Ø60~Ø25*T42.15mm/ Ø60~Ø30*T35.5mm
原厂型号(OEM PN):DNS-Screen#07070167-203501(联轴器)、07070167-203502(内环)
产品型号(WSTech. PN):
备注(Note):G5E2

05-22.:TRANSFER ROLLER FOR STRIPPER LINE..

品名(Description):TRANSFER ROLLER FOR STRIPPER LINE
材质(Material):UPE+SUS 螺牙护套
尺寸(Size):Ø128~Ø96*L21mm
原厂型号(OEM PN):SHIBAURA#
产品型号(WSTech. PN):WST-AE.02R06.145
备注(Note):for G7 Wet-Etching use in STRIPPER LINE of ACST0100, with SUS316 screw 内/外六角 M6*L8~L10mm

05-23.:下BELT ROLLER FOR WATER LINE..

品名(Description):下BELT ROLLER FOR WATER LINE
材质(Material):PVC+EPDM belt
尺寸(Size):Ø126~Ø26/Ø28*L21mm
原厂型号(OEM PN):SHIBAURA#
产品型号(WSTech. PN):WST-AE.02R06.205/WST-L7A675、WST-AE.02R06.206/WST-L7A674、WST-AE.02R06.207/WST-L7A673
备注(Note):for G7 Wet-Etching used.
1. WST-AE.02R06.205/ROLLER(+BELT).滚筒.Ø130mm*L22mm.SHIBAURA.WST-L7A675
2. WST-AE.02R06.206/ROLLER(+BELT).滚筒.Ø126~26mm*L21mm轻量化.SHIBAURA.WST-L7A674
3. WST-AE.02R06.207/ROLLER(+BELT).滚筒.Ø126~28*L21mm.SHIBAURA.WST-L7A673
 

05-24.:ETCH C/H OSCG轴-SPACER、大/小SNAP RING...

品名(Description):ETCH C/H OSCG轴-SPACER、大/小SNAP RING
材质(Material):PVC、UPE
尺寸(Size):PVC-Ø20.3*T95mm/ UPE-Ø50*T3mm、Ø30*T3mm
原厂型号(OEM PN):DNS-Screen#
产品型号(WSTech. PN):Y
备注(Note):for G7 Wet-Etching use

05-26.:FREE ROLLER RING+迫紧件+锁合件..

品名(Description):FREE ROLLER RING+迫紧件+锁合件
材质(Material):UPE+PVC+PVC
尺寸(Size):Ø30*Ø45*L17mm
原厂型号(OEM PN):DNS-Screen#
产品型号(WSTech. PN):-
备注(Note):G5~G7 for WMA Wet-Etcher(AL chamber) upgrade use, due to the glass from T0.7mm to T0.5~T0.3mm, avoid bending and tripping.
为降低制程转换至0.5mm glass之破片率,需改善基板bending过大之问题,而於原间距中间加装 Free Roller 以增加基板之support,进而降低glass bending。
* Size from Ø30*Ø45*L17mm->Ø30*Ø48*L17mm->Ø30*Ø48*L37mm..by L7AE2.


05-27.:FLICKER SENSOR PEDESTAL,PVC..


品名(Description):FLICKER SENSOR PEDESTAL(ITO/AL/Water)
材质(Material):PVC
尺寸(Size):W66*H46*L38mm for ITO process, W66*H46*L23.5mm for AL process, W56*H44*L23.5mm for Water process、 W28*L15*H62mm for L7Ap.
原厂型号(OEM PN):
产品型号(WSTech. PN):WST-AE.01H03.116
备注(Note):G4~G5 use with 12-01.:FLICKER SENSOR..FK5-SUS-PFA2-* in ITO, AL, Water process.

05-28.:FREE ROLLER..

品名(Description):FREE ROLLER
材质(Material):PVC -> Peek
尺寸(Size):
原厂型号(OEM PN):TEL#
产品型号(WSTech. PN):-
备注(Note):for TFT-LCD G5 fab use with tirelines to avoid dap in ITO, AL process. 湿蚀刻(Wet-Etching)制程中原Roller设计为"PVC Roller+Viton O-Ring",但长时间使用后因酸硷化学溶液之作用,导致O-Ring被damage或脱落而产生滑/破片或Tripping之现象,因而必须随时注意及定期更换O-Ring,无形徒增使用者生产之风险及PM时间之负担。变更Roller接触面之特殊设计Tirelines(斜向、横向、纵向),及不变动其他原固定配件的情况之下,即可完全解决上述情况之问题!

05-30.:SNAP RING 传送带C型扣环+滚轮扣环..

品名(Description):SNAP RING 传送带C型扣环+滚轮扣环
材质(Material):UPE
尺寸(Size):Ø36*Ø28*T4mm(ITO)、Ø30*Ø18*T4mm(ITO)、Ø45*Ø34.5*L15mm(ITO)、Ø30*Ø20*T4.8mm(AL)
原厂型号(OEM PN):DNS-Screen#
产品型号(WSTech. PN):WST-AE.01R05.105(大)、WST-AE.01R05.104(小)、WST-AE.01R05.103(中)、WST-AE.01R05.106(AL)
备注(Note):
1. For G7 use in "MIDDLE" for AL section and "DOUBLE-SIDE" for ITO system.
2. Ø45*Ø34.5*L15mm(ITO) with 6 pcs in Stock..2011/11/08.
3. Ø30*Ø18*T4mm(ITO) with 5 pcs in Stock..2011/11/08.
4. Ø30*Ø20*T4.8mm(AL) with 4 pcs in Stock..2011/11/08: p/n#WST-AE.01R05.106/RING WMA SNAP RING.铝蚀刻槽滚轮固定环.内外径*厚度 20~30MM*4.8MM...WST-A7A3459

05-31.:SIDE GUIDE ROLLER BEARING..7J434835

品名(Description):SIDE GUIDE ROLLER BEARING
材质(Material):PCTFE/UPE->Teflon®
尺寸(Size):Ø20*Ø10*L20mm(PTFE); Ø34*Ø25*L15.5mm(UPE); Ø34*Ø25*L10.5mm(UPE)
原厂型号(OEM PN):DNS-Screen#7J434835
产品型号(WSTech. PN):WST-AE.02R06.059;
备注(Note):
1. For TFT-LCD G5~G7 fab use in Wet-Etching Stripper,主要是让基版(Glass)靠著行进防止基板偏移(Shift),确认有刻痕时即需更换以防止基板缺角与破片之风险发生。
2. With 7 pcs in Stock..2011/11/08.

05-32.:GUIDE ROLLER 导轮..

品名(Description):GUIDE ROLLER 导轮
材质(Material):PP or UPE
尺寸(Size):Ø25*Ø10*L20mm*T2.5mm, 内含6小洞
原厂型号(OEM PN):DNS-Screen#
产品型号(WSTech. PN):WST-AE.01R06.017
备注(Note):use in G4 Wet-Etching. "GUIDE ROLLER"主要是让基版(Glass)靠著行进防止基板偏移(Shift),确认有刻痕时即需更换以防止基板缺角与破片之风险发生.

05-33.:SUPPORTER ALIGN SHAFT(Wet-Etching段Spray槽)..

品名(Description):SUPPORTER ALIGN SHAFT(Wet-Etching段Spray槽)
材质(Material):PVC
尺寸(Size):Ø30*L150mm
原厂型号(OEM PN):DNS-Screen#
产品型号(WSTech. PN):WST-AE.01S34.010
备注(Note):use in G7 Wet-Etching段Spray槽, 含PVC Screw/Washer、SUS316L Screw各1pc, 一体车制式; 配合05-02.:SIDE GUIDE ROLLER for Stripper-Ø35mm使用

05-34.:SUPPORTER TUBE+SEAT(Wet-Etching段Deep槽)..

品名(Description):SUPPORTER TUBE+SEAT(Wet-Etching段Deep槽)
材质(Material):PVC
尺寸(Size):Ø18*L63mm; W30*L60*T15mm
原厂型号(OEM PN):DNS-Screen#
产品型号(WSTech. PN):WST-AE.01S34.009、WST-AE.01S34.008
备注(Note):use in G7 Wet-Etching段Deep槽, 含SUS316L Screw上下各1pc、Washer*1pc; 配合05-02.:SIDE GUIDE ROLLER for AL-Ø25mm使用

05-35.:SUPPORTER TUBE+SIDE GUIDE ROLLER(悬吊式)..

品名(Description):SUPPORTER TUBE+SIDE GUIDE ROLLER(悬吊式)
材质(Material):SUS+UPE
尺寸(Size):Ø16*L78mm; Ø37.6*L50mm
原厂型号(OEM PN):DNS-Screen#
产品型号(WSTech. PN):WST-AE.01S34.007, WST-AE.01R06.113
备注(Note):use in G7 Wet-Etching段水洗槽(右侧), 含SUS316L Screw/Washer各1pc

05-36.:SUPPORTER TUBE+SEAT+SIDE GUIDE ROLLER(导角式)..DNS-Screen#72981242+72981241+72981243

品名(Description):SUPPORTER TUBE+SEAT+SIDE GUIDE ROLLER(导角式)/
1. GUIDE SUOOPOT TUBE.导杆.PVC/SUS 316L-M8 20*83MM.WST-A7B2170.DNS#72981242(7-29-81242)
2. GUIDE SUPPORT TUBE SEAT.导杆座.W40*L66*T15.WST-A7B2171.DNS#72981241(7-29-81241)
3. U T GUIDE SUPPORT ROLLER.导杆.UPE/WHITE. Ø35*L35MM.WST-A7B2171.DNS#72981243(7-29-81243)
材质(Material):PVC+PVC+UPE
尺寸(Size):Ø15mm~10mm*L92.5mm+W40mm*L46mm*T15mm+Ø35mm~10mm*L30mm; Ø 20mm*L83mm+W40mm*L66mm*T15mm+Ø35mm*L35mm
原厂型号(OEM PN):DNS-Screen#72981242+72981241+72981243
产品型号(WSTech. PN):(WST-AE.01S34.006+WST-AE.01S03.102+WST-AE.01R06.112)、(WST-AE.01G07.019+WST-AE.01G07.018+WST-AE.01G07.016)
备注(Note):use in G7 Wet-Etching段水洗槽(左侧)-ADWMA100 & 200, 含PVC Washer*1pc、SUS316L M6/M8 Screw*1pc
* Maker: Dainippon Screen Mfg. Co., Ltd.(DNS) 大日本スクリーン制造株式会社

05-37.:双C型对锁环止档HOLDER/STRIPPER ROLLER USE FIXTURE.去光阻槽固定器

品名(Description):双C型对锁环止档HOLDER/STRIPPER ROLLER USE FIXTURE.去光阻槽固定器.PEEKØ49.65~Ø29.85*T10.08MM.DNS
材质(Material):UPE/PVC/PET/PEEK®
规格尺寸(SPEC. Size):Ø49.65*Ø29.85*T10.08mm
原厂型号(OEM PN):DNS-SCREEN#
产品型号(WSTech. PN):WST.02H03.017(SH)、WST-AE.01F08.001(WST-L7A5923)
备注说明(Note):use in G7 Wet-Etching for Stripper Chamber, 配合"11-02.:STRIPPER CHAMBER O-RING,SUS O型环"使用防止滑动及shift; 2ea/ST, 含SUS316L M4螺丝*2pcs。

05-38.:STOP PIN 止挡板..

品名(Description):STOP PIN 止挡板
材质(Material):UPE
规格尺寸(SPEC. Size):...; W60*L160*T15mm; W60*L245*T15mm
原厂型号(OEM PN):
产品型号(WSTech. PN):
备注说明(Note):玻璃基版两侧定位用 in G6

05-39.:EXIT GUIDE ROLLER/GUIDE ROLLER 斜角..

品名(Description):EXIT GUIDE ROLLER/GUIDE ROLLER.GUIDE ROLLER 斜角.Ø35*Ø10*L20MM.DNS
材质(Material):UPE
规格尺寸(SPEC. Size):Ø35mm(-)~32mm(-)*Ø10.3mm(+)*L20mm(-)
原厂型号(OEM PN):DNS-Screen#
产品型号(WSTech. PN):WST-AE.01G07.015(WST-A8E31296)
备注说明(Note):G7.5 use in STO200出口端

05-40.:3ble双C型扣环HOLDER/ETCH ROLLER HOLDER.蚀刻槽滚轮HOLDER.PVC..

品名(Description):3ble双C型扣环HOLDER(含SUS螺丝组*左/右各2)/ETCH ROLLER HOLDER.蚀刻槽滚轮HOLDER.PVC
材质(Material):PVC
规格尺寸(SPEC. Size):Ø50*Ø30*L30mm
原厂型号(OEM PN):DNS-Screen#
产品型号(WSTech. PN):WST-AE.01H03.120(WST-A8E33158)
备注说明(Note):G7B Demo OK in All Stripper Line-Double Roller-下Roller, 用以避免下Roller滑移. Modify from "05-37.:双C型对锁环止档" for "11-02.:STRIPPER CHAMBER O-RING,SUS O型环" in STO section-DN roller use with "05-41.:可调式HOLDER".

05-41.:可调式HOLDER..

品名(Description):可调式HOLDER
材质(Material):UPE+M4*L100mm 外六角SUS screw+nut*2pcs
规格尺寸(SPEC. Size):(UP)W70*L80*T30mm(High)/(DN)W70*L59*T30mm(Low)
原厂型号(OEM PN):DNS-Screen#
产品型号(WSTech. PN):WST.
备注说明(Note):G7B use in Stripper section.

05-42.:轴承HOLDER for UP Conveyer use..

品名(Description):轴承HOLDER for UP Conveyer use
材质(Material):POM/white
规格尺寸(SPEC. Size):W48*L62*H39mm
原厂型号(OEM PN):DNS-Screen#
产品型号(WSTech. PN):
备注说明(Note):for G8Awe use in 常温大气外部使用无酸硷气液体接触

05-44.:KCT FLICKER SENSOR 座..KCT#

品名(Description):KCT FLICKER SENSOR 座
材质(Material):
规格尺寸(SPEC. Size):L68.2*W40*H12mm
原厂型号(OEM PN):DMS#/KCT#
产品型号(WSTech. PN):WST-AE.01S03.103
备注说明(Note):for G8 use in 全段.


* Maker: K.C.Tech(KCTech-Knowledge, Creativity & Technology) (주)케이씨텍 韩商凯斯科技有限公司

06-01.:上ROLLER(蝶翼)..7J425123

品名(Description):上ROLLER(蝶翼)
材质(Material):DuPont™ Teflon®
尺寸(Size):Ø70.2mm~Ø46.2mm*L13mm
原厂型号(OEM PN):DNS-Screen#7J425123
产品型号(WSTech. PN):WST-AE.01R06.012
备注(Note):for TFT-LCD G4 use in Wet-Etching.

06-02.:MAINTENANCE侧下ROLLER(蝶翼)..7J425124

品名(Description):MAINTENANCE侧下ROLLER(蝶翼)
材质(Material):DuPont™ Teflon®
尺寸(Size):Ø61.2mm~Ø38.3mm*T13.6mm
原厂型号(OEM PN):DNS-Screen#7J425124
产品型号(WSTech. PN):WST-AE.01R06.013
备注(Note):for TFT-LCD G4~G6 fab use in Wet-Etching.

06-03.:下ROLLER(中间)..7J425181

品名(Description):下ROLLER(中间)
材质(Material):DuPont™ Teflon®
尺寸(Size):Ø51.2mm~ Ø42mm×T13.6mm
原厂型号(OEM PN):DNS-Screen#7J425181
产品型号(WSTech. PN):WST-AE.01R06.011
备注(Note):for TFT-LCD G4~G6 fab use in Wet-Etching.

06-04.:STRIPPER OP侧下ROLLER..7J425122

品名(Description):STRIPPER OP侧下ROLLER
材质(Material):DuPont™ Teflon®
尺寸(Size):Ø50.2mm~Ø38.2mm*T13mm
原厂型号(OEM PN):DNS-Screen#7J425122
产品型号(WSTech. PN):WST-AE.01R06.010
备注(Note):for TFT-LCD G4~G6 fab use in Wet-Etching.

06-05.:UP/DN SIDE ROLLER..

品名(Description):UP/DN SIDE ROLLER
材质(Material):PVC->TEFLON®-PTFE
尺寸(Size):内径Ø30mm,外径Ø50mm & Ø64mm两种
原厂型号(OEM PN):DNS-Screen#
产品型号(WSTech. PN):WST.
备注(Note):use in TFT-LCD G5 fab., avoid dap in ITO, AL process. 湿蚀刻(Wet-Etching)制程中原Roller设计为"PVC Roller+Viton O-Ring",但长时间使用后因酸硷化学溶液之作用,导致O-Ring被damage或脱落而产生滑/破片或Tripping之现象,因而必须随时注意及定期更换O-Ring,无形徒增使用者生产之风险及PM时间之负担。利用TEFLON®抵抗酸硷化学溶液超佳之特性,佐以Roller接触面之特殊设计Tirelines(斜向、横向、纵向),在不变动其他原固定配件的情况之下,即可完全解决上述情况之问题!Total Stocks≈@500pcs

06-06.:TEFLON ROLLER FOR FLICKER SENSOR SEAT..

品名(Description):TEFLON® ROLLER FOR FLICKER SENSOR SEAT
材质(Material):DuPont™ Teflon®
尺寸(Size):
原厂型号(OEM PN):SHIBAURA#
产品型号(WSTech. PN):
备注(Note):G7 use to collocate with 11-05.:FLICKER SENSOR SEAT-SUS.

06-08.:STRIPPER SIDE ROLLER..7J434834

售价 NT$ 550

品名(Description):STRIPPER SIDE ROLLER
材质(Material):DuPont™ Teflon®
尺寸(Size):Ø60mm~Ø38mm*T15.5mm
原厂型号(OEM PN):DNS-Screen#7J434834
产品型号(WSTech. PN):WST-AE.02R06.135
备注(Note):G4~G6

06-10.:上/下SIDE ROLLER FOR STRIPPER段-..7J460830/7J460829

品名(Description):上/下SIDE ROLLER FOR STRIPPER段-整支式ROLLER
材质(Material):DuPont™ Teflon®
尺寸(Size):Ø61.4mm~Ø30mm*L13.15mm/ Ø100mm~Ø30mm*L13.15mm
原厂型号(OEM PN):DNS-Screen#7J460830、7J460829
产品型号(WSTech. PN):WST-AE.02Z01.057、WST-AE.02Z01.117
备注(Note):G7~G8 use with 11-02.:STRIPPER CHAMBER O-RING,SUS O型迫紧环

06-11.:FREE ROLLER for STRIPPER..、7J434835

售价 NT$ 380

品名(Description):FREE ROLLER for STRIPPER
材质(Material):DuPont™ Teflon®
尺寸(Size):Ø49.5*Ø38.5*L12.95mm
原厂型号(OEM PN):DNS-Screen#、7J434835
产品型号(WSTech. PN):WST-AE.02R06.109[6.08 DNS原Side Roller]、WST-AE.02R06.035[1.9 昌2nd]、WST-AE.01R06.130[L5AE2 new 2nd 100/12]
备注(Note):for G4~G6 fab use in Wet-Etching Stripper section, in Transmission shaft,PVC/PTFE ↓
   

06-13.:GUIDE ROLLER 导轮..7J425189

品名(Description):GUIDE ROLLER 导轮
材质(Material):DuPont™ Teflon®
尺寸(Size):Ø15mm*L12mm*T4.5mm
原厂型号(OEM PN):DNS-Screen#7J425189
产品型号(WSTech. PN):WST-AE.02R06.040
备注(Note):G3~G7 use in Wet-Etching. "GUIDE ROLLER"主要是让基版(Glass)靠著行进防止基板偏移(Shift),确认有刻痕时即需更换以防止基板缺角与破片之风险发生.

06-14.:DN ROLLER for STRIPPER SECTION..7J429518

售价 NT$ 320

品名(Description):DN ROLLER for STRIPPER SECTION
材质(Material):DuPont™ Teflon®
尺寸(Size):Ømm~Ømm*Lmm
原厂型号(OEM PN):DNS-Screen#7J429518
产品型号(WSTech. PN):WST-AE.02R06.133
备注(Note):for TFT-LCD G5 fab use in Wet-Etching stripper section

06-15.:UP ROLLER for STRIPPER SECTION..7J429522

售价 NT$ 450

品名(Description):UP ROLLER RING for STRIPPER SECTION
材质(Material):DuPont™ Teflon®
尺寸(Size):Ømm~Ømm*Lmm
原厂型号(OEM PN):DNS-Screen#7J429522
产品型号(WSTech. PN):WST-AE.02R06.134
备注(Note):for TFT-LCD G5 fab use in Wet-Etching stripper section

06-16.:沟槽式 UP ROLLER..7J429519

售价 NT$ 340

品名(Description):沟槽式 UP ROLLER
材质(Material):DuPont™ Teflon®
尺寸(Size):Ømm~Ømm*Lmm
原厂型号(OEM PN):DNS-Screen#7J429519
产品型号(WSTech. PN):WST-AE.02R06.137
备注(Note):for TFT-LCD G5 fab use in Wet-Etching

06-17.:FREE ROLLER(下) FOR STRIPPER段-..7J44397004,KMFA-266034

品名(Description):FREE ROLLER(下) FOR STRIPPER段-半支式ROLLER
材质(Material):DuPont™ Teflon®, UPE
尺寸(Size):Ø100.38mm*Ø29.05mm*L10.25mm(Screw type)/Ø100*Ø38.05*L9.95mm(Key type)
原厂型号(OEM PN):DNS-Screen#7J44397004, SEMES,Korea#KMFA-266034
产品型号(WSTech. PN):WST-AE.02R06.144/
备注(Note):G7~G8 use with 11-02.:STRIPPER CHAMBER O-RING,SUS O型迫紧环,G7A phase-I(III) & G7B phase-I.

06-18.:STRIPPER UP/DN SIDE/MIDDLE GUIDE/FREE ROLLER..SEMES#KMFA-265989~8/KMFA-289914+289875

品名(Description):STRIPPER UP/DN SIDE/MIDDLE GUIDE/FREE ROLLER
1. STRIPPER LOW ROLLER.滚轮.Ø61.4*Ø30*L13.15MM..DNS.KMFA-289914
2. STRIPPER UP ROLLER.滚筒.Ø100*Ø38.05*L12.9MM..DNS.KMFA-289875
材质(Material):Teflon-PTFE
规格尺寸(SPEC. Size):UP-Ø61.4*Ø30*L13.15mm/DN-Ø100*Ø38.05*L12.9mm or L9.95mm, Key-Seat 4.1*(4.1/2)mm
原厂型号(OEM PN):SEMES,Korea#KMFA-265989~8、KMFA-289914+KMFA-289875
产品型号(WSTech. PN):WST-AE.02R06.159(WST-L7B655)、WST-AE.02R06.160
(WST-A7B659)
备注说明(Note):G7.5 use in Stripper section-phase I of DMS., DN ROLLER=key type.

07-01.:SEAL O RING..RVZJ001775Z80D.7-3

品名(Description):SEAL O RING(Seal O-ring/Oring)
材质(Material):Teflon+O Ring
尺寸(Size):Ø32~Ø24.5×T4×H4.4mm
原厂型号(OEM PN):RVZJ001775Z80D.7-3
产品型号(WST PN):WST-AE.01S25.001
备注(Note):G5~G7 Etching Chamber Wall Piping 上之HOSCH.轴封 for WMA(AL) or WTO(ITO) 机台 use.

07-04.:GASKET/PACKING-ASAHI AV series(PTFE+EPDM)..0-39-06616~8


品名(Description):GASKET/PACKING-ASAHI AV series
材质(Material):TEFLON®-PTFE Pad+Rubber:EPDM 10K
尺寸(Size)13A、15A、20A、25A、32A、40A、50A、65A、80A(75A)、100A、125A、150A、200A、250A、300A、350A、400A ...etc.
原厂型号(OEM PN):DNS#0-39-06618 ...etc.
产品型号(WST PN):WST-AE.02P09.129(20A)、WST-AE.02P09.128(25A)、WST-AE.02P09.143、WST-AE.02P09.140、WST-AP.13P09.003、WST-AE.02P09.109(50A)、WST-AE.02P09.106/PACKING.(PTFE 25A10K).密封片.DNS#03906616(0-39-06616)、WST-AE.02P09.107/PACKING.(PTFE 30A10K)密封片.DNS#0-39-06617(03906617)、WST-AE.02P09.108/PACKING.密封片.PTFE 40A10K.DNS#0-39-06618(03906618) ...etc.
备注(Note):G3~G7 use in Stripper Pump-供酸系统 of Wet-Etching.
 .


 
↑ 日本Asahi总公司实景
* Maker: Asahi Organic Chemicals Industry Co., Ltd. 旭有机材工业株式会社
* Seller: ASAHI AV TRADING CO.,LTD. 旭エー・ブイ産业株式会社 [ASAHI AV®配管材料 制品価格表]

11-02.:STRIPPER CHAMBER ORING,SUS O型环..

品名(Description):STRIPPER CHAMBER ORING,SUS O型环
材质(Material):SUS316
尺寸(Size):Ø49.5~Ø30.3*T10mm +/-0.05mm
原厂型号(OEM PN):DNS-Screen#
产品型号(WST PN):WST-AE.01O01.246
备注(Note):G7 use in STO段 for 迫紧装置 with 06-10.:上/下SIDE ROLLER FOR STRIPPER段-整支式ROLLER & 06-17.:FREE ROLLER(下) FOR STRIPPER段-半支式ROLLER, 含3pcs螺丝+2pcs套桶+4pcs垫片。L7A Qty.:10pcs/支 Roller*19支 Roller/ch.*4ch./台*6台/厂区=4,560pcs/厂区。

SEPARATE COLLAR/Standard Slit Collars
1. IKS#SCSS-3015C(SCSS3015C/SCSS 3015C): SCSS スタンダードセパレートカラー, ノーマル 黒染め(鉄 S45C)
2. IKS#SCS 1715S: SCS スタンダードスリットセットカラー/ノーマル SUS304(ステンレス)
3. IKS#SCSS 1715S: SCSS スタンダードセパレートカラー/ノーマル SUS304(ステンレス)
* Maker: IWATA MFG. CO., LTD.(IKS) 株式会社 岩田制作所

11-03.:Free Roller SUS 固定器/Free Roller 配件组..

品名(Description):FREE ROLLER固定器
材质(Material):SUS304 or 316
尺寸(Size):Ø25*Ø40*L32mm
原厂型号(OEM PN):DNS-Screen#
产品型号(WSTech. PN):WST-AE.02R06.142/S0.00157.029/Free Roller 配件组..Ø25*Ø45*L40mm+/-0.05mm,WST-A5e11639,SUS304
备注(Note):
1. 为降低制程转换至0.5mm glass之破片率,需改善基板bending过大之问题,而於原间距中间加装Free Roller以增加基板之support,进而降低glass bending; 内容包含:"Body 主体","Compelled 梯形迫紧件","Locker 锁合件","Roller Fixed 压定片","Roller tenon 卡榫块"共5pcs/ST。
2. For G5~G7 for STA Wet-Stripper(剥膜机) upgrade use, due to the glass from T0.7mm to T0.5~T0.3mm, avoid bending and tripping.
3. With 2 model/set in Stock and 50 pcs Roller Fixed(压定片)..2011/11/08.


11-04.:FLICKER SENSOR PEDESTAL,SUS..


品名(Description):FLICKER SENSOR PEDESTAL(Stripper)
材质(Material):SUS
尺寸(Size):W56*H46*L30mm
原厂型号(OEM PN):
产品型号(WSTech. PN):WST-
备注(Note):G4~G5 use with 12-01.:FLICKER SENSOR in Stripper process.

11-05.:FLICKER SENSOR SEAT,SUS..


品名(Description):FLICKER SENSOR SEAT
材质(Material):SUS
尺寸(Size):
原厂型号(OEM PN):SHIBAURA#
产品型号(WSTech. PN):
备注(Note):G7 use to collocate with 06-06.:TEFLON® ROLLER FOR FLICKER SENSOR SEAT

12-01.:FLICKER SENSOR TUBE LINE#FK5-SUS-PFA2-****

品名(Description):FLICKER SENSOR TUBE
材质(Material):PFA-3F tubing
尺寸(Size):Ø6/ Ø8mm*L1,200/ 1,500/ 1,800mm above
原厂型号(OEM PN):DNS-Screen#FK5-SUS-PFA2-1500/1700/1800/2100
产品型号(WSTech. PN):WST-AE.01S04.040、WST-AE.01S04.042、WST-AE.01S04.128
备注(Note):G4~G5 use with 05-27.:FLICKER SENSOR PEDESTAL,PVC.. or 11-04.:FLICKER SENSOR PEDESTAL,SUS.. in ITO, AL, Water process. Hi-Power Reed Switch(磁簧开关) inside working with dimensions=Ø0.6*L56.8mm, Part No.=WST2050: Contact form:1A、Max. switching voltage/current:220V/0.7A、Max. contact rating:50W.
* Ex. p/n#FK5-SUS-PFA-1500、FK5-SUS-PFA-1800 ...etc.: INX.#R26460126T90/电磁开关(MAGENTIC_SWITCH/AUTO_SWITCH).DNS.FK5-SUS-PFA2-1500.5MM

13-01.:BALL BEARING UPG#6005/#6905~4..73990054、HANIL#all series

品名(Description):BALL BEARING UPG#6005(UPG6005)、#6904(UPG6904)、#6905(UPG6905)
材质(Material):PEEK®/Ceramic/UPE内外轮圈+ PEEK®/Teflon cage 保持架+ ZrO2(氧化锆)/Si3N4(氮化矽) 滚珠
尺寸(Size):No.#6005-d25*D47*B12mm/ No.#6905-d25*D42*B9mm/ No.#6904-d20*D37*B9mm
原厂型号(OEM PN):DNS-Screen#73990054
产品型号(WST PN):WST.02B04.035、WST.01B04.042(3)、WSTCB.04B04.016、WSTCB.04B04.115、WST.13B04.115、WST.01B04.022
备注(Note):
  
  
* TOK#D-6203D, PE/UPE In/Out Ring+UPE Cage+ZrO2 Ball.
* Ball Bearing-DMS(韩商电美世)#6002H-ZZU76UG31/6005H-ZZU76UG22/6804H-ZZU76UG22 for Disk Brush used、All Ceramic Bearing#6001 & #7001 ..by Hi-Pron Bearing-HANIL HIGHTECH co., LTD. (주)한일하이테크

PEEK™是威格斯公司(Victrex®)公司注册商标。
Victrex® is a registered trademark of Victrex Manufacturing Limited.
PEEK™, APTIV™, PEEK-ESD™, T-Series™, PEEK-HT™, ST™ are trademarks of Victrex plc.
VICOTE® is a registered trademark of Victrex plc.

13-02.:SUPPORT ROLLER BEARING..SJ-295A

品名(Description):SUPPORT ROLLER BEARING...DIA 64 PEEK WHEEL
材质(Material):PTFE or PEEK®
尺寸(Size):Ø64-Ø12*L19.4mm, 玻璃 or 陶瓷制内珠(Ceramic-Si3N4/black or ZrO2/white)=1/4"(Ø6.3535mm)*15PCS
原厂型号(OEM PN):SHIBAURA#SJ-295A/SBA1889
产品型号(WST PN):SY-AE.02R06.146(PEEK®)->WST-AE.02R06.146/ROLLER SHIBAURA PEEK ROLLER.去光阻机滚筒.外内径厚度63.7~12.0*19.5..WST-L7E7326
备注(Note):G7 use in Stripper C/H(chamber) 背布斜撑Support (free/transfer)Roller於长时间接触化学药剂(Chemical)后会产生「膨润现象」而造成Roller无法转动即影响传送作业,故需定期检视及更换:使用寿命(Life-time)约为1.5~2Years。
* 内轴使用於SUS轴承钢芯Ø12mm, 培林轴承内径Ø tolerance=11.xx~12.xxmm(紧配~松配)


 

PEEK™是威格斯公司(Victrex®)公司注册商标。
Victrex® is a registered trademark of Victrex Manufacturing Limited.
PEEK™, APTIV™, PEEK-ESD™, T-Series™, PEEK-HT™, ST™ are trademarks of Victrex plc.
VICOTE® is a registered trademark of Victrex plc.

13-03.:SIDE GUIDE BEARING ROLLER..DMS#PK/UPE 630 KZB1

品名(Description):SIDE GUIDE BEARING ROLLER/GUIDE ROLLER BEARING.培林.UPEØ30*Ø6*L22MM..DNS.UPE630-KZB1
材质(Material):Peek™ ring->UPE ring +cage+ZrO2 ball
规格尺寸(SPEC. Size):外Ø30mm*内Ø6mm*外H20mm~内H22mm、Ø15mm*Ø6mm*T5mm ...etc.
原厂型号(OEM PN):DMS#PK/UPE 630 KZB1
产品型号(WSTech. PN):WST-AE.01G07.017(WST-A8E35622)
备注说明(Note):G7.5 use in upper conveyer as Right/Left Side Guide Roller; Ceramic-ZrO2 陶瓷内珠自润性佳不易磨耗但成本较高.
* Maker: DMS CO., Ltd. (주)디엠에스 韩商电美世设备有限公司

Remark:
PEEK™是威格斯公司(Victrex®)公司注册商标。
Victrex® is a registered trademark of Victrex Manufacturing Limited.
PEEK™, APTIV™, PEEK-ESD™, T-Series™, PEEK-HT™, ST™ are trademarks of Victrex plc.
VICOTE® is a registered trademark of Victrex plc.


13-06.:SCREW BEARING FREE ROLLER/FREE ROLLER BEARING.轴承

品名(Description):SCREW BEARING FREE ROLLER with Nut/FREE ROLLER BEARING.轴承.UPEØ32*M8*L32MM.DNS
材质(Material):UPE ring+cage+Si3N4 ball +PVC Nut
规格尺寸(SPEC. Size):外Ø32mm*H32mm(including M8 screw length)
原厂型号(OEM PN):DNS#
产品型号(WSTech. PN):WST-AE.01B04.132(WST-A8E35623)
备注说明(Note):G7.5 use in Stripper/AL 水洗槽; black color of Si3N4 ball(氮化矽内珠)。

13-07.:EXIT BEARING GUIDE ROLLER/GUIDE ROLLER BEARING.出口导轮培林

品名(Description):EXIT BEARING GUIDE ROLLER/GUIDE ROLLER BEARING.出口导轮培林.UPEØ37*Ø12*L22MM..DNS
材质(Material):UPE ring+UPE cage+Glass ball
规格尺寸(SPEC. Size):外Ø37mm~Ø33mm*内H22mm~外H20mm
原厂型号(OEM PN):DNS#
产品型号(WSTech. PN):WST-AE.01G07.014(WST-A8E35621)
备注说明(Note):G7.5 use in STO300 exit.

14-01.:MOTOR GEAR 马达齿轮/减速机..7J424145/ 7J407174

品名(Description):MOTOR GEAR 马达齿轮/ GEAR 减速机
材质(Material):UPE
尺寸(Size):Ø55*T20mm
原厂型号(OEM PN):DNS-Screen#7J424145/ 7J407174
产品型号(WST PN):WST-AE.01G03.123/ WST-AE.02G03.128
备注(Note):G4

14-03.:GEAR HEAD 扇型齿轮头..7J326627/6882/8608/87831

品名(Description):GEAR HEAD 扇型齿轮头
材质(Material):PVC/ UPE/ PPS
尺寸(Size):Ø73*(Ø20 & Ø25)*L34mm
原厂型号(OEM PN):DNS-Screen#7J326627(UPE)/ 7J326882(PPS)/ 7J328608(PVC)/ 7J3287831(PVC)
产品型号(WST PN):WST-AE.01G03.011(UPE)/ WST-AE.01G03.012(PPS)
备注(Note):
1. For G5~G7 use, Motor SPEC.=GFB5G20、GFB5G30、GFB5GN75K
2. PVC type with 4 pcs in Stock..2011/11/08.

14-04.:OBLIQUE GEAR 斜型齿轮头..

品名(Description):OBLIQUE GEAR 斜型齿轮头
材质(Material):POM(coffee)/ MC(blue)/ SUS(metal)
尺寸(Size):Ø40.7~Ø20*L35mm
原厂型号(OEM PN):SHIBAURA#
产品型号(WST PN):WST.02G03.139
备注(Note):
1. Use in G7 Wet-Etching for SHIBAURA-Stripper section UP/DN.
2. With 3 pcs in Stock..2011/11/08.

14-05.:MOTOR AXIS/PULLEY 马达轴芯/皮带轮组..

品名(Description):MOTOR AXIS/PULLEY 马达轴芯/皮带轮组
材质(Material):SUS316L bearing-steel 轴承钢/ AL(aluminum) pulley 皮带轮/ PVC magneti roller 磁性环盘
尺寸(Size):Axis=Ø30*L143mm*M6; Pulley=Ø60*Ø30*W25mm-1",G24
Axis=Ø25~Ø30mm*L174mm*M8, Pully=Ø65*Ø18/25/30*W20~25mm-1",G38
原厂型号(OEM PN):DNS-Screen#7J-45-224702
产品型号(WSTech. PN):WST.02S08.007、WST.02P32.005(7J45224702)、WST.02P32.006
备注(Note):
(1) MOTOR AXIS: use in G7 for STRIPPER SHAFT 去光阻机外磁盘轴芯
(2) PULLEY: for G6 use=8M/G24/有键槽(穿沟)/无攻芽(SEDO); for G7 use=MA5/G38/有键槽(穿沟)/无攻芽(SEDO):内径Ø18mm(小)为Motor端之主动件,内径Ø25mm(大)为其他带动Roller轴端之从动件,Qty.=1:10~15/内径Ø18mm(小)标准键槽(穿沟)=W6*L6mm穿沟Key,内径Ø25mm(大)标准键槽(穿沟)=W8*L8mm穿沟Key..this type for Stripper Single Pulley(单轴) use

14-07.:SUS C型扣环 of S20/S25..

品名(Description):SUS C型扣环
材质(Material):SUS304C+浸铬
尺寸(Size):(小)S20轴芯用;(大)S25轴芯用
原厂型号(OEM PN):
产品型号(WSTech. PN):WST-AE.02R06.103 & WST-AE.02R06.104
备注(Note):use in G7-Wet Etching with 16-02.:整截式 磁性ROLLER UNR095/060,材质具磁性含碳量较高才有弹性,适用於80℃~100℃之酸/硷环境中,硬度≈HRc 44~52;坊间五金行市售品均为(黑色)碳钢材质,染黑or镀锌表面,较不耐酸/硷(易生銹)及高温环境(易变形)。

14-08.:AL PULLEY..7J45224702(R)

品名(Description):AL PULLEY
材质(Material):ALUMINUM+electroplate
规格尺寸(SPEC. Size):Ø65(+5mm)*Ø25*W20mm*G38/Key=8*8*45mm
原厂型号(OEM PN):DNS-Screen#7J45224702(R)
产品型号(WSTech. PN):WST.02P32.005(R)
备注说明(Note):G7 use in WMA(AL) for Single/Double Pulley(单/双轴) with "14-07.:SUS C型扣环 of S20/S25".

14-09.:SFT SPUR GEAR(POM)..DMS#HC1100-040W0007-0

品名(Description):SFT SPUR GEAR(POM)
材质(Material):PTFE,white
规格尺寸(SPEC. Size):Ø44*Ø17*L(10+25)mm
原厂型号(OEM PN):DMS#HC1100-040W0007-0
产品型号(WSTech. PN):
备注说明(Note):for G7B use.
* Maker: DMS CO., Ltd. (주)디엠에스 韩商电美世设备有限公司

14-10.:SPUR GEAR(PP/PTFE)..DMS#WS0000-040W00**-0

品名(Description):SPUR GEAR(PP/PTFE)
材质(Material):PP,limpid white/PTFE,white
规格尺寸(SPEC. Size):Ø65*Ø25*L(6+12+10)mm
原厂型号(OEM PN):DMS#WS0000-040W0041-0 / WS0000-040W0014-0
产品型号(WSTech. PN):
备注说明(Note):for G7B use.
* Maker: DMS CO., Ltd. (주)디엠에스 韩商电美世设备有限公司

14-11.:WORM WHEEL(POM)(6_1)..DMS#WS0000-040W0027-3

◎ 品名(Description):WORM WHEEL(POM)(6_1)
◎ 材质(Material):POM,limpid white
◎ 规格尺寸(SPEC. Size):Ø55*Ø22*L(15+25+15)mm
◎ 原厂型号(OEM PN):DMS#WS0000-040W0027-3
◎ 产品型号(WSTech. PN):
◎ 备注说明(Note):for G7B use.
* Maker: DMS CO., Ltd. (주)디엠에스 韩商电美世设备有限公司

14-12.:WORM WHEEL(PP)(6_1)..DMS#WS1950-042W5001-0

◎ 品名(Description):WORM WHEEL(PP)(6_1)
◎ 材质(Material):PP,limpid white
◎ 规格尺寸(SPEC. Size):Ø55*Ø22*L28mm+Ø6 hole*2
◎ 原厂型号(OEM PN):DMS#WS1950-042W5001-0
◎ 产品型号(WSTech. PN):
◎ 备注说明(Note):for G7B use.
* Maker: DMS CO., Ltd. (주)디엠에스 韩商电美世设备有限公司

14-23.:EUV Motor Gear..DMS#/KCT#

◎ 品名(Description):EUV Motor Gear
◎ 材质(Material):
◎ 规格尺寸(SPEC. Size):Ø53*Ø12.3*L45mm
◎ 原厂型号(OEM PN):DMS#/KCT#
◎ 产品型号(WSTech. PN):WST-AE.01G03.139
◎ 备注说明(Note):for G8 use in EUV.


* Maker: DMS CO., Ltd. (주)디엠에스 韩商电美世设备有限公司
* Maker: K.C.Tech(KCTech-Knowledge, Creativity & Technology) (주)케이씨텍 韩商凯斯科技有限公司

14-24.:C/V motor(出口)..DMS#/KCT#

◎ 品名(Description):C/V motor(出口)
◎ 材质(Material):
◎ 规格尺寸(SPEC. Size):Ø53.2*Ø10*L38.2mm
◎ 原厂型号(OEM PN):DMS#/KCT#
◎ 产品型号(WSTech. PN):WST-AE.01G03.138
◎ 备注说明(Note):for G8 use in C/V.


* Maker: DMS CO., Ltd. (주)디엠에스 韩商电美世设备有限公司
* Maker: K.C.Tech(KCTech-Knowledge, Creativity & Technology) (주)케이씨텍 韩商凯斯科技有限公司

14-25.:C/V 传动轴Gear..DMS#/KCT#

◎ 品名(Description):C/V 传动轴Gear
◎ 材质(Material):
◎ 规格尺寸(SPEC. Size):Ø53.2*Ø19.8*L26mm
◎ 原厂型号(OEM PN):DMS#/KCT#
◎ 产品型号(WSTech. PN):WST-
◎ 备注说明(Note):for G8 use in C/V.
 

* Maker: DMS CO., Ltd. (주)디엠에스 韩商电美世设备有限公司
* Maker: K.C.Tech(KCTech-Knowledge, Creativity & Technology) (주)케이씨텍 韩商凯斯科技有限公司

14-26.:EUV 传送Gear..DMS#/KCT#

◎ 品名(Description):EUV 传送Gear
◎ 材质(Material):
◎ 规格尺寸(SPEC. Size):Ø53.3*Ø19.9*L19mm
◎ 原厂型号(OEM PN):DMS#/KCT#
◎ 产品型号(WSTech. PN):WST-
◎ 备注说明(Note):for G8 use in C/V 传动轴.


* Maker: DMS CO., Ltd. (주)디엠에스 韩商电美世设备有限公司
* Maker: K.C.Tech(KCTech-Knowledge, Creativity & Technology) (주)케이씨텍 韩商凯斯科技有限公司

14-27.:Roller Gear..DMS#/KCT#

◎ 品名(Description):Roller Gear
◎ 材质(Material):
◎ 规格尺寸(SPEC. Size):Ø57.5*Ø44*L35mm
◎ 原厂型号(OEM PN):DMS#/KCT#
◎ 产品型号(WSTech. PN):WST-
◎ 备注说明(Note):for G8 use in 全段


* Maker: DMS CO., Ltd. (주)디엠에스 韩商电美世设备有限公司
* Maker: K.C.Tech(KCTech-Knowledge, Creativity & Technology) (주)케이씨텍 韩商凯斯科技有限公司

14-28.:Dry A/K Motor Gear..DMS#/KCT#

◎ 品名(Description):Dry A/K Motor Gear
◎ 材质(Material):
◎ 规格尺寸(SPEC. Size):Ø57.7*Ø44*L35mm
◎ 原厂型号(OEM PN):DMS#/KCT#
◎ 产品型号(WSTech. PN):WST-
◎ 备注说明(Note):for G8 use in Dry A/K





* Maker: DMS CO., Ltd. (주)디엠에스 韩商电美世设备有限公司
* Maker: K.C.Tech(KCTech-Knowledge, Creativity & Technology) (주)케이씨텍 韩商凯斯科技有限公司

14-29.:EUV Roller Gear..DMS#/KCT#

◎ 品名(Description):EUV Roller Gear
◎ 材质(Material):
◎ 规格尺寸(SPEC. Size):Ø40.6*Ø20*L29mm
◎ 原厂型号(OEM PN):DMS#/KCT#
◎ 产品型号(WSTech. PN):WST-
◎ 备注说明(Note):for G8 use in EUV.


* Maker: DMS CO., Ltd. (주)디엠에스 韩商电美世设备有限公司
* Maker: K.C.Tech(KCTech-Knowledge, Creativity & Technology) (주)케이씨텍 韩商凯斯科技有限公司

14-30.:Double Roller Gear..DMS#/KCT#

◎ 品名(Description):Double Roller Gear
◎ 材质(Material):
◎ 规格尺寸(SPEC. Size):Ø70*Ø32*L26mm
◎ 原厂型号(OEM PN):DMS#/KCT#
◎ 产品型号(WSTech. PN):WST-
◎ 备注说明(Note):for G8 use in ETCH 槽内.


* Maker: DMS CO., Ltd. (주)디엠에스 韩商电美世设备有限公司
* Maker: K.C.Tech(KCTech-Knowledge, Creativity & Technology) (주)케이씨텍 韩商凯斯科技有限公司

16-01.:磁性ROLLER..7T2338111

品名(Description):磁性ROLLER
材质(Material):PVC or SUS
尺寸(Size):Ø47or Ø62~Ø20×L25mm
原厂型号(OEM PN):DNS-Screen#7T2338111
产品型号(WST PN):
备注(Note):G4~G7.5

16-02.:整截式 磁性ROLLER UNR095/060..7-39-89512、7-39-89511

品名(Description):整截式 磁性ROLLER UNR095/UNR060
材质(Material):SUS+anodize Ni
尺寸(Size):Ø60 or Ø95×Ø21×L25mm
原厂型号(OEM PN):DNS-Screen#7-39-89512、7-39-89511
产品型号(WSTech. PN):WST-AE.01R06.047、WST-AE.01R06.048
备注(Note):G7 use in Wet-Etching STO; Ø60(小)=6pcs/槽、Ø95(大)=3pcs/槽; Qty.=2:1。
1. WST-AE.01R06.047/Strpiier Unit Transfer Roller.UNR095.73989512
2. WST.AE-01R06.048/Strpiier Unit Transfer Roller.UNR060.73989511

16-03.:半截式 磁性ROLLER..7-39-89514

品名(Description):半截式 磁性ROLLER
材质(Material):SUS+anodize Ni
尺寸(Size):Ø100-(Ø5.35*3Holes)*L(11.85+11.58)mm, Ø100-Ø10*L(11.5+15)mm, Ø99.75-Ø10.85*L(13.85+13.20)mm
原厂型号(OEM PN):DNS-Screen#7-39-89514
产品型号(WSTech. PN):..., WST.01R06.046(L7AE2), ...
备注(Note):G6~G7.5 use in Wet-Etching


17-12.:HEATER FUSE LINE..SEFUSE-SF119E

品名(Description):HEATER FUSE LINE/STO HEATER FUSE LINE
材质(Material):Metal
尺寸(Size):L455mm*2, +/-5mm
原厂型号(OEM PN):SEFUSE-SF119E, 150628-53
产品型号(WSTech. PN):WST-AE.02F05.103
备注(Note):for TFT-LCD G7 Wet-Etching use in DNS system Tank Heater(软板曝光机), 121℃,10A,JET 250V~